Home - Products - GB07SW0102

GB07SW0102

1 in 2 out HDMI Switch

FEATURES
1. Compact size: only of 6.7cm by 8.8cm.
2. No need of outside power supply. (The power input is optional)
3. No need of setting.
4. Distribution: 2 asynchronous HDMI outputs.
5. Output auto switching function, no buttons or switches on the board.
6. Signaling rates up to 2.25Gbits in support of 1080P display.
7. 8dB receiver equalization to compensate for 5m HDMI cable losses.
8. 3dB driver pre-emphasis to compensate for PCB losses.
9. Each port supports HDMI or DVI inputs.
10. HDCP compliant.

INTRODUCTION

Grandbeing’s GB07SW0102 is a two-output HDMI splitter (Asynchronous switching method). It switches the HDMI input to two asynchronous outputs. These two outputs are asynchronous and auto switching.(Smart function)
GB07SW0102 has the ability of equalization and amplification to ensure HDMI signal’s transmission through long cable without quality loss.
GB07SW0102 offers solutions for residential consumers, HDTV retail and show site, HDTV, STB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

CONNECT AND OPERATE

1) Connect the HDMI input source（such as：HD-DVD、PS3、STB etc.）into GB07SW0102.
2) Connect the HDMI outputs( such as : HD-LCD、HD-DLP）into GB07SW0102.
3) Power on the input source.
4) Power on the display you want to show. (Keep the unused display power off, otherwise it may interfere the normal display.)

（Remark：The power adapter is needed when the signal source has no sufficient power driving ability.）
* Smart function：Using one HDMI signal source（such as HDDVD）, connecting two HDMI displays. When only the display 1 is on, output 1 has signal. When only the display 2 is on, the output 2 has signal. When the two displays are all on, only output 1 has signal.

Manual Download